FTP Server Connector

FTP Server connectors provide connection credentials to access the full-featured Arc FTP Server.

Key Capabilities

Full-featured embedded FTP server with FTPS (FTP over TLS/SSL) support
Multi-client architecture with individual user profiles and directory isolation
Configurable permissions for send and receive directories per trading partner
Welcome banners, file filtering, and temporary file handling for reliable operations
Support for both active and passive modes with configurable port ranges

Overview

The Arc FTP Server is primarily configured on the Profiles page. Then, individual FTP Server connectors provide a unique client profile to authenticate to the FTP Server. The client profile consists of a username (which matches the FTP Server connector’s Connector Id), a password, a set of send and receive directories, and permissions to read and/or write files in these directories. FTP clients are not given permissions to the root of the FTP Server, which means that FTP clients should always cd into the send (to download) and receive (to upload) directories after connecting.

Video Resources

Watch this short video for an overview of how to configure an FTP Server. The video uses an SFTP Server in the example, but the principles are the same for FTP.

Profile Configuration

The FTP Server Profile must be configured before connections can be established with individual FTP Server connectors. Click Profiles on the navbar, then click the FTP Server tab.

Server Configuration

Server implementation settings.

Setting	Description
Port	The port on which the FTP Server listens for incoming connections.
FTP Over TLS	How TLS/SSL should be negotiated when clients connect to the server. Choose Explicit to establish a plain text connection where TLS/SSL is then started with an explicit command. Choose Implicit to immediately negotiate TLS/SSL without establishing a plain text connection.
Server TLS Certificate	The TLS certificate that identifies the server. Only required if the server is operating as an FTPS server (in other words, if TLS/SSL is enabled).
Certificate Password	The password required to access the Server TLS Certificate.
Welcome Message	The banner presented to FTP clients when they connect to the server.
Root Directory	The root directory for the server. Subfolders are created in the root for individual client profiles (in other words, for each configured FTP Server connector). Each client profile includes a Send folder, where clients can download files from the server, and a Receive folder, where clients can upload files to the server.
Allowed Files Filter	A glob pattern that determines which files are accepted by the FTP server. You can use negative patterns to indicate files that should not be downloaded (for example, -.tmp). Separate multiple file types by commas (for example, .x12,*.edi).

Other Settings

Settings that do not fall into the previous category.

Setting	Description
Active Mode	Check this to enable Active mode on the remote FTP server. Keep in mind that Passive mode is less likely to result in firewall interference with the connection.
Inactivity Timeout	The length of time (in seconds) that must pass without activity for a user to time out.
Passive Port Range	When using Passive mode, the application uses any available port to listen for incoming data connections. You can override this by setting this field to a port range in `start-end` format. For example: `1024-` refers to ports higher than 1024 (inclusive) and `1024-2048` refers to ports between 1024 and 2048 (inclusive).
Passive Address	When using Passive mode, the application returns the IP address for the local interface. You can override this by setting this field to a specific public IP address.
TLS Enabled Protocols	The list of TLS/SSL protocols supported when establishing outgoing connections. Best practice is to only use TLS protocols. SSL v2 and SSL v3 are considered vulnerable and should only be used if your partner does not support higher versions. Keep in mind that TLS v1.3 is not universally adopted, and might be refused if the destination server does not support it.

Logging

ログの作成と保存を制御する設定です。

設定	説明
Log Level	コネクタが生成するログの詳細度です。サポートを依頼する際は、これをDebug に設定してください。
Log Rotate Interval	新しいログファイルを作成するまでに待機する日数です。
Log Delete Interval	古いログファイルを削除するまでに待機する日数です。

Miscellaneous

Miscellaneous 設定は、特定のユースケース向けの設定です。

設定	説明
Other Settings	非表示のコネクタ設定をセミコロン区切りのリストで設定できます（例：`setting1=value1;setting2=value2`）。通常のコネクタのユースケースや機能では、これらの設定の使用は必要ありません。

Connector Settings

Once you configure the FTP Server profile settings, create and configure an individual FTP Server connector for each trading partner on the Flows page.

Settings Tab

Configuration

設定	説明
Connector Id	コネクタの静的で一意の識別子です。
Connector Type	コネクタ名とその機能の説明を表示します。
Connector Description	コネクタおよびフロー内でのその役割について自由形式の説明を提供するためのオプションフィールドです。

サーバーステータス

コネクタの基盤サービスの現在の状態。以下のステータスが使用可能です：

ステータス	説明
アクティブ	サービスが実行中です。
非アクティブ	サービスは設定済みですが、現在は実行されていません。
未設定	基盤となるプロファイルまたはサービスが設定されていません。

FTP プロファイルを作成済みかどうかに応じて、FTP プロファイルを設定またはFTP プロファイルを表示リンクをクリックして新しいタブでプロファイルを開きます。

User Configuration

Credentials for authenticating to the local FTP server.

Setting	Description
User	The username credential for logging in to the local FTP server. This value is always the same as the Connector Id.
Password	The password credential associated with the User.

Permissions

Settings related to the read and write permissions the configured client has for the Send and Receive folders.

Setting	Description
Send Directory Permissions	Use the checkboxes to set read and write permissions for the Send directory. This directory is where files are downloaded.
Receive Directory Permissions	Use the checkboxes to set read and write permissions for the Receive directory. This directory is where files are uploaded.

Advanced Tab

Local Folders

Settings related to the folders where clients upload and download files.

Setting	Description
Input Folder (Send)	Files in the Send folder are available to be downloaded by clients.
Output Folder (Receive)	Files uploaded by the client are placed in the Receive folder. Files remain in the Receive folder or are passed along to the next connector in the flow.

Other Settings

Settings not included in the previous categories.

Setting	Description
Home Directory	The configured server path where connected users start after logging in. For the valid locations and how the path is validated, see Home Directory.
Allowed Files Filter	A glob pattern that determines which files are accepted by the FTP server. Overrides the Allowed Files Filter option on the FTP Profile page.
Remove File After Send	Whether files in the Send folder should be removed after the client receives them.
Temp Receive Extensions	Files with a matching extension are not recorded in the Receive table and do not fire the After Receive event until they are renamed. Supply a comma-delimited list of file extensions.
Timeout	The length of time (in seconds) the server waits for a connection response before throwing a timeout error.
Save Subfolder	Check this to add a SubFolder header to received messages. This header represents the path relative to the Local Folders.
Local File Scheme	A scheme for assigning filenames to messages that are output by the connector. You can use macros in your filenames dynamically to include information such as identifiers and timestamps. For more information, see Macros.

Message

Message 設定は、コネクタがメッセージを検索する方法と、処理後にメッセージを管理する方法を決定します。

Note： 以下の設定は非推奨となり、デフォルトで非表示になっています。以前に有効化またはデフォルト以外の値に設定されていたコネクタにのみ表示されます。処理済みファイルのコピーを保持するには、フロー内のコネクタを右クリックし、成功パスを表示を選択して、成功パスをFile コネクタに接続してください。

設定	説明
Sent フォルダに保存（非推奨）	コネクタが処理したファイルをSent フォルダにコピーします。デフォルトで無効です。Sent フォルダに保存されたファイルは保存データの暗号化の対象外です。
Sent フォルダのスキーム（非推奨）	選択した時間間隔でSent フォルダ内のファイルをグループ化します。Sent フォルダに保存が有効な場合のみ適用されます。

Logging

ログの作成と保存を制御する設定です。

設定	説明
Log Level	コネクタが生成するログの詳細度です。サポートを依頼する際は、これをDebug に設定してください。
Log Subfolder Scheme	選択した間隔に従って、コネクタがLogs フォルダ内のファイルをグループ化するよう指示します。Weekly オプション（デフォルト）は、コネクタが毎週新しいサブフォルダを作成し、その週のすべてのログをそのフォルダに保存するよう指示します。この設定を空白のままにすると、コネクタはすべてのログをLogs フォルダに直接保存します。多数のトランザクションを処理するコネクタでは、サブフォルダを使用することでログを整理しやすくなり、パフォーマンスが向上します。
Log Messages	処理したファイルのログエントリにファイル自体のコピーを含めるには、これをオンにします。これを無効にすると、Transactions タブからファイルのコピーをダウンロードできなくなる場合があります。

Miscellaneous

Miscellaneous 設定は、特定のユースケース向けの設定です。

設定	説明
Other Settings	非表示のコネクタ設定をセミコロン区切りのリストで設定できます（例：`setting1=value1;setting2=value2`）。通常のコネクタのユースケースや機能では、これらの設定の使用は必要ありません。

Alerts Tab

SLAs Tab

Establishing a Connection

Each FTP Server connector represents a single trading partner’s connection parameters. The trading partner should connect to the FTP server using the server settings (such as port and TLS mode) from the Profile page and the user configuration settings in the dedicated FTP Server connector (User and Password). Each trading partner has separate Send and Receive directories that are subfolders of the root. The partner should download files from the Send folder and upload files to the Receive folder. The client is not permitted to upload or download files from the root.

Home Directory

The Home Directory setting controls which folder a client lands in when it logs in to an FTP Server connector. Configure it in the connector’s Advanced tab, under Other Settings. Setting a home directory is useful when you migrate from other FTP software that let you configure a landing folder, or for automated systems that upload or download at whatever directory they land in without issuing navigation (cd) commands. The field defaults to empty, but it also accepts a server path:

Empty (default): The client lands at the virtual root (/).
Set to a path: On successful login, the client’s initial working directory is the specified path. A client that connects and immediately uploads, downloads, or lists files without changing directories operates inside the home directory.

The home directory must be a server path (starting with /) that resolves against the Root Directory defined on the connector’s Profile, and it must match a configured server location; you cannot set it to an arbitrary path that only exists on disk. For the FTP Server connector, the valid locations are:

/ (the virtual root): this is the default when the field is empty, so setting it explicitly has no additional effect
/Send
/Receive

The field normalizes your input, so Receive, /Receive, \Receive, and /Receive/ are all treated as the same path. The value is validated when you save the connector: a path that does not match a configured server location is rejected with an error that names the invalid value.

The home directory only sets the initial landing directory at login. It is not a chroot or jail and does not restrict which folders a client can navigate to afterward; folder access is still governed by the permission settings.

Macros

Examples

Common Errors

Error: Could not bind server socket: Permission denied.

Cause This error can appear when you attempt to connect to an FTP server and the process hosting Arc does not have sufficient privileges to establish a listener on the specified port.

In some cases (such as Linux environments and hosted instances running in an Amazon AMI), you cannot use ports below 1024.

Resolution Choose a different port, or change the identity of the process hosting Arc to one with permissions to bind to the port. The Amazon AMI-hosted version of Arc uses the Ubuntu operating system, so CData recommends that you use an Uncomplicated Firewall (UFW) to manage port permission issues. For example, setting up FTP Server to run on port 8021 in Arc and using UFW to forward port 21 to 8021 at the OS level looks like this:

ufw allow 21/tcp
ufw allow 8021/tcp
echo "
*nat
:PREROUTING ACCEPT [0:0]
-A PREROUTING -p tcp --dport 21 -j REDIRECT --to-port 8021
COMMIT" >> /etc/ufw/before.rules

If your environment uses a different Linux operating system, CData recommends that you bind to a port above the restricted range (for example, 8021 for FTP traffic) and use iptables to route incoming requests on the desired port to the allowed port: iptables -t nat -I PREROUTING -p tcp --dport 21 -j REDIRECT --to-port 8021

はじめに

フロー

EDI トレーディングパートナー管理コンソール

コネクタ

マッピング

API と自動化

ハウツーガイド

スクリプティング

ソフトウェアライセンスとサードパーティ著作権

Key Capabilities

Overview

Video Resources

Profile Configuration

Server Configuration

Other Settings

Logging

Miscellaneous

Connector Settings

Settings Tab

Configuration

サーバーステータス

User Configuration

Permissions

Advanced Tab

Local Folders

Other Settings

Message

Logging

Miscellaneous

Alerts Tab

SLAs Tab

Establishing a Connection

Home Directory

Macros

Examples

Common Errors

Error: Could not bind server socket: Permission denied.

​Key Capabilities

​Overview

​Video Resources

​Profile Configuration

​Server Configuration

​Other Settings

​Logging

​Miscellaneous

​Connector Settings

​Settings Tab

​Configuration

​サーバーステータス

​User Configuration

​Permissions

​Advanced Tab

​Local Folders

​Other Settings

​Message

​Logging

​Miscellaneous

​Alerts Tab

​SLAs Tab

​Establishing a Connection

​Home Directory

​Macros

​Examples

​Common Errors

​Error: Could not bind server socket: Permission denied.

Key Capabilities

Overview

Video Resources

Profile Configuration

Server Configuration

Other Settings

Logging

Miscellaneous

Connector Settings

Settings Tab

Configuration

サーバーステータス

User Configuration

Permissions

Advanced Tab

Local Folders

Other Settings

Message

Logging

Miscellaneous

Alerts Tab

SLAs Tab

Establishing a Connection

Home Directory

Macros

Examples

Common Errors

Error: Could not bind server socket: Permission denied.